1999-2004 Ford F250SD 16 Inch 16"×7″ Painted Silver Steel Rim

1999–2004 Ford F250 Super Duty 16×7" Steel Wheels

Set of 4 · Grey Painted · 8-Lug · Accuride · Part# F81Z1015AA

Listing Description

Up for sale is a complete set of four (4) OEM steel wheels removed from a 1999–2004 Ford F250 Super Duty. These are the factory-original 16×7-inch painted steel rims manufactured by Accuride, finished in classic factory grey paint. They are solid, heavy-duty wheels built to handle the demands of a full-size Super Duty pickup.

Specifications

• Rim Diameter: 16 inches

• Rim Width: 7 inches (16×7)

• Bolt Pattern: 8×170mm (8×6.69")

• Center Bore: 125mm

• Offset: 7mm

• Backspacing: 7mm

• Finish: Grey Painted Steel

• Lug Nut Thread Size: M14×2.0

• Manufacturer: Accuride

• OEM Part Numbers: F81Z1015AA / F81A1015AA

• Interchange Part Number: 560-03340

Condition

These wheels show normal surface rust and wear consistent with their age — surface corrosion on the center hub area and some paint fading/chipping around the edges, as seen in the photos. The structural integrity of all four wheels is sound with no cracks, bends, or significant damage. They are suitable for continued use as daily drivers, work trucks, or as a cost-effective replacement set. A fresh coat of paint or a media blast and rattle-can respray would have these looking near-new.

Compatibility

These wheels are compatible with 1999–2004 Ford F250 Super Duty and F350 Super Duty models equipped with the 8×170mm bolt pattern. Always verify your vehicle's bolt pattern, offset, and center bore before purchasing.

Asking Price: $35.00 each or best offer for the set.

Frequently Asked Questions

Q: What vehicles will these wheels fit?

A: These wheels are designed for 1999–2004 Ford F250 and F350 Super Duty trucks with an 8×170mm bolt pattern. They may also fit certain Ford Excursion models from the same era that share this bolt pattern. Always confirm your vehicle's bolt pattern, center bore (125mm), and offset before purchasing.

Q: Are all four wheels included?

A: Yes, this listing is for the full set of four steel wheels. Individual wheels may be available — please reach out to discuss.

Q: Do these come with tires, lug nuts, or center caps?

A: No. The wheels are sold bare — no tires, lug nuts, or center caps are included. If you need lug nuts, these wheels use M14×2.0 thread size, which is standard for this bolt pattern.

Q: How is the condition? Are they bent or cracked?

A: All four wheels are structurally sound — no bends, cracks, or warping. There is surface rust around the hub area and some cosmetic paint wear typical of wheels this age, as clearly shown in the photos. They hold air and are safe for use.

Q: What is the offset and backspacing?

A: The offset is 7mm and the backspacing is also 7mm. This is the factory OEM specification for 1999–2004 Ford F250 Super Duty trucks.

Q: Can I use these on a 2005 or newer F250?

A: No. Ford changed the bolt pattern on the F250/F350 Super Duty beginning with the 2005 model year from 8×170mm to 8×200mm. These wheels will NOT fit 2005 and newer Super Duty trucks.

Q: Is shipping available?

A: Due to the weight of steel wheels, shipping costs can be significant. Local pickup in the Payette, Idaho area is preferred. Freight shipping can be arranged at the buyer's expense — please inquire for a quote.

Q: Will these work with a leveling kit or lift kit?

A: These are factory OEM wheels with stock dimensions and offset. They will work fine with most leveling kits. For larger suspension lifts, you may want to consult a wheel fitment guide to confirm clearance, particularly with aftermarket tires wider than the stock size.